A $$3$$ $$-$$ phase fully controlled bridge converter with free wheeling diode is fed from $$400$$ $$V$$, $$50$$ $$Hz$$ $$AC$$ source and is operating at a firing angle of $${60^ \circ }.$$ The load current is assumed constant at $$10A$$ due to high load inductance The input displacement factor $$(IDF)$$ and the input power factor $$(IPF)$$ of the converter will be

A solar cell of $$350V$$ is feeding power to an $$ac$$ supply of $$440$$ $$V,$$ $$50$$ $$Hz$$ through a $$3$$- phase fully controlled briodge converter. A large inductance is connected in the $$dc$$ circuit to maintain the $$dc$$ current at $$20A.$$ If the solar cell resistance of $$0.5\Omega ,$$ then each thryristor will be reverse biased for a period of

Consider a phase $$-$$ controlled converter shown in figure The thyristor is fired at an angle $$\alpha $$ in every positive half cycle of the input voltage. If the peak value of the instantaneous output voltage equals $$230$$ $$V,$$ the firing angle $$\alpha $$ is close to

A phase - controlled half - controlled single - phase converter is shown in figure. The control angle $$\alpha = {30^ \circ }$$

The output $$dc$$ voltage wave shape will be as shown in