The source of a silicon (n_i = 10¹⁰ per cm³) n - channel MOS transistor has an aewa of 1 sq $$\mu m$$ and a depth of 1 $$\mu m$$ . If the dopant density in the source is 10¹⁹/cm³, the number of holes in the source region with the above volume is approximately

In the three dimensional view of a silicon n-channel MOS transistor shown below, $$\delta = 20$$ nm. The transistor is of width 1 $$\mu m$$. The depletion width formed at every p-n junction is 10 nm. The relative permittivities of Si and SiO₂, respectively, are 11.7 and 3.9, and $${\varepsilon _0}$$ = 8.9 $$ \times {10^{ - 12}}$$ F/m.

The source-body junction capacitance is approximately

In the three dimensional view of a silicon n-channel MOS transistor shown below, $$\delta = 20$$ nm. The transistor is of width 1 $$\mu m$$. The depletion width formed at every p-n junction is 10 nm. The relative permittivities of Si and SiO₂, respectively, are 11.7 and 3.9, and $${\varepsilon _0}$$ = 8.9 $$ \times {10^{ - 12}}$$ F/m.

The gate-source overlap capacitance is approximately

In the CMOS circuit shown, electron and hole mobilities are equal, and M₁ and M₂ are equally sized. The device M₁ is in the linear region if