All the components in the bandpass filter given below are ideal. The lower -3 dB frequency of the filter is 1 MHz . The upper -3 dB frequency (in MHz, rounded off to the nearest integer) is ___________ .

The identical MOSFETs $M_1$ and $M_2$ in the circuit given below are ideal and biased in the saturation region. $M_1$ and $M_2$ have a transconductance $g_m$ of 5 mS .

The input signals (in Volts) are:

$$ \begin{aligned} & V_1=2.5+0.01 \sin \omega t \\ & V_2=2.5-0.01 \sin \omega t \end{aligned} $$

The output signal $V_3$ (in Volts) is _ .

In the circuit shown, the identical transistors Q1 and Q2 are biased in the active region with $\beta=120$. The Zener diode is in the breakdown region with $V_Z=5 \mathrm{~V}$ and $I_Z=25 \mathrm{~mA}$. If $I_L=12 \mathrm{~mA}$ and $V_{E B 1}=V_{E B 2}=0.7 \mathrm{~V}$, then the values of $R_1$ and $R_2$ (in $\mathrm{k} \Omega$, rounded off to one decimal place) are ___________ , respectively.

All the diodes in the circuit given below are ideal.

Which of the following plots is/are correct when $V_I$ (in Volts) is swept from $-M$ to $M$ ?