1
GATE EE 2002
Subjective
+5
-0
A single phase $$6300$$ $$kVA,$$ $$50$$ $$Hz,$$ $$3300V/400V$$ distribution transformer is connected between two $$50$$ $$Hz$$ supply systems, $$A$$ and $$B$$ as shown in Fig. The transformer has $$12$$ and $$99$$ turns in the low and high voltage windings respectively. The magnetizing reactance of the transformer referred to the high voltage side is $$500\Omega .$$ The leakage reactance of the high and low voltage windings are $$1.0\Omega $$ and $$0.012\Omega $$ respectively. Neglect the winding resistance and core losses of the transformer. The Thevenin voltage of system $$A$$ is $$3300V$$ while that of system $$B$$ is $$400V.$$ the short circuit reactance of systems $$A$$ and $$B$$ are $$0.5\Omega $$ and $$0.010\Omega $$ respectively. If no power is transferred between $$A$$ and $$B,$$ so that the two system voltages are in phase, find the magnetizing ampere turns of the transformer. GATE EE 2002 Electrical Machines - Transformers Question 10 English
2
GATE EE 2002
Subjective
+5
-0
In a single phase $$3$$ winding transformer the turns ratio for primary: secondary: tertiary windings is $$20:4:1.$$ With the lagging currents of $$50A$$ at a power factor of $$0.6$$ in the tertiary winding find the primary current and power factor.
3
GATE EE 2002
Subjective
+5
-0
A $$230V,$$ $$250$$ $$rpm.$$ $$100A$$ separately excited $$dc$$ motor has an armature resistance of $$0.5\,\Omega .$$ The motor is connected to $$230V$$ $$dc$$ supply and rated $$dc$$ voltage is applied to the field winding. It is driving a load whose torque speed characteristic is given by $${T_L} = 500$$$$ - 10\omega ,$$ where $$\omega $$ is the rotational speed expressed in $$rad/sec$$ and $${T_L}$$ is the load torque in $$Nm.$$ Find the steady state speed at which the motor will drive the load and the armature current drawn by it from the source. Neglect the rotational losses of the machine.
4
GATE EE 2002
MCQ (Single Correct Answer)
+1
-0.3
If a 400 V, 50 Hz, star connected, 3 phase squirrel cage induction motor is operated from a 400 V, 75 Hz supply, the torque that the motor can now provide while drawing rated current from the supply?
A
reduces
B
increases
C
remains the same
D
increase or reduces depending upon the rotor resistance
EXAM MAP