The Thevenin equivalent voltage, V_th, in V (rounded off to 2 decimal places) of the network shown below, is ________

A resistor and a capacitor are connected in series to a 10 V dc supply through a switch. The switch is closed at t = 0, and the capacitor voltage is found to cross 0 V at t = 0.4τ, where τ is the circuit time constant. The absolute value of percentage change required in the initial capacitor voltage if the zero crossing has to happen at t = 0.2τ is _______  (rounded off to 2 decimal places).

A benchtop dc power supply acts as an ideal 4 A current source as long as its terminal voltage is below 10 V. Beyond this point, it begins to behave as an ideal 10 V voltage source for all load currents going down to 0 A. When connected to an ideal rheostat, find the load resistance value at which maximum power is transferred, and the corresponding load voltage and current.

Currents through ammeters A₂ and A₃ in the figure are 1∠10° and 1∠70°, respectively. The reading of the ammeter A₁ (rounded off to 3 decimal places) is _____ A.