Two Sinusoidal signal $$p\left( {{\omega _1}t} \right) = A\,\sin \omega t,$$ and $$q\left( {{\omega _2}t} \right)$$ are applied to $$X$$ and $$Y$$ inputs of a dual channel $$C.R.O,$$ the lissajous figure displayed on the screen is shown below. The signal $$q\left( {{\omega _2}t} \right)$$ will be represented as

Two $$8$$ $$A$$ $$D$$ $$C$$ $$s$$ one of single slope integrating type and other of successive approximation type. Take $${T_A}$$ and $${T_B}$$ times to connect $$5V$$ analog input signal to equivalent digital output. If the input analog signal is reduced to $$2.5V$$ the approximate time taken by the two $$ADC's$$ will respectively be

A $$230V,$$ $$50Hz,$$ $$4$$ pole, single phase induction motor is rotating in the clockwise (forward) direction at a speed of $$1425$$ $$rpm.$$ If the rotor resistance at standstill is $$7.8\,\,\Omega ,$$ then the effective rotor resistance in the backward branch of the equivalent circuit will be

A $$400$$ $$V,$$ $$50$$ $$Hz$$, $$4$$ pole, $$1400$$ $$rpm$$, star connected squirrel cage induction motor has the following parameters referred to the stator:
$$R = 1.0\,\Omega ,{X_s} = X{'_r} = 1.5\,\Omega $$ Neglect stator resistance and core and rotational losses of the motor. The motor is controlled from a $$3$$-phase voltage source inverter with constant $$V/f$$ control. The stator line-to-line voltage $$(rms)$$ and frequency to obtain the maximum torque at starting will be: