GATE CE 2009 | Workmenship and Fundamentals Question 14 | Reinforced Cement Concrete

GATE CE 2009

MCQ (Single Correct Answer)

-0.3

For limit state of collapse, the partial safety factors recommended by IS 456:2000 for estimating the design strength of concrete and reinforcing steel are respectively

1.15 and 1.5

1.0 and 1.0

1.5 and 1.15

1.5 and 1.0

GATE CE 2008

MCQ (Single Correct Answer)

-0.3

A reinforced concrete structure has to be constructed along a sea coast. The minimum grade of concrete to be used as per IS: 456-2000 is

M 15

M 20

M 25

M 30

GATE CE 2007

MCQ (Single Correct Answer)

-0.3

Consider the following statements:

1. The compressive strength of concrete decreases with increase in water-cement ratio of the concrete mix.

2. Water is added to the concrete mix for hydration of cement and workability.

3. Creep and shrinkage of concrete are independent of the water-cement ratio in the concrete mix.

The true statements are

1 and 2

1, 2 and 3

2 and 3

only 2

GATE CE 2005

MCQ (Single Correct Answer)

-0.3

The flexural strength of M30 concrete as per IS: 456-2000 is

3.83 MPa

5.47 MPa

21.23 MPa

30.0 MPa

PREVIOUS NEXT

GATE CE Subjects

Construction Material and Management

Critical Path Method Construction Materials Program Evolution Review Technique

Geomatics Engineering Or Surveying

Levelling Traversing Theodolites and Plane Table Surveying Measurement of Area, Volume and Theory of Errors and Survey Adjustment Field Astronomy and Photogrammetric Surveying Basics of GIS, GPS and Remote Sensing Angular Measurements and Compass Survey Basic Concepts Linear Measurements and Chain Survey

Engineering Mechanics

Equilibrium of Force Systems Work Energy Principle and Impulse Momentum Equation

Hydrology

Precipitation and Frequency of Rainfall Data Evaporation and Transpiration Infiltration Hydrograph Flood Estimation and Flood Routing

Transportation Engineering

Highway Devolopment and Planning Highway Geometric Design Traffic Engineering Highway Materials Pavement Design Railway, Runway and Taxiway Design

Strength of Materials Or Solid Mechanics

Pure Bending Shear Stress In Beams Simple Stresses Complex Stress Centroid and Moment of Inertia Torsion Shear Force and Bending Moment Deflection of Beams Thin Cylinder Strain Energy Method Columns and Struts Propped Cantilever Beam

Reinforced Cement Concrete

Singly Reinforced Sections Workmenship and Fundamentals Doubly Reinforced Sections Flanged Beams Limit State of Collapse Shear Limit State of Collapse Torsion Limit State of Collapse Compression Footings Bond Limit State of Serviceability Prestressed Concrete Slabs

Steel Structures

Materials and Specifications Tension Members Riveted Joints and Bolted Joints Welded Connections Eccentric Connections Compression Members Beams Plate Girder

Irrigation

Gravity Dams and Spillways Water Requirement of Crops

Environmental Engineering

Sources and Coveyances Water Quality Control of Water Treatment of Water Water Demand Waste Water Characteristics Treatment of Sewage Disposal of Sewage Effluent Solid Waste Management Air Pollution Noise Pollution

Engineering Mathematics

Probability and Statistics Calculus Complex Variable Differential Equations Linear Algebra Numerical Methods Vector Calculus Transform Theory

Structural Analysis

Stability and Static Indeterminacy Methods of Analysis Plastic Analysis Moment Distribution Method Indeterminacy Energy Principle Influence Line Diagram Arches and Cable Slope Deflection Method Truss Matrix Method

Geotechnical Engineering

Origin of Soils Definitions and Properties of Soils Classification of Soils and Clay Mineralogy Effective Stress and Permeability Seepage Analysis Compaction of Soil Compressibility and Consolidation Shear Strength of Soil Stress Distribution of Soil Retaining Wall and Earth Pressure Stability of Slopes Shallow Foundation Pile Foundation Soil Stabilization

Fluid Mechanics and Hydraulic Machines

Fluid Pressure and Measurement Fluid Dynamics Boundary Layer Theory Drag and Lift Flow Through Pipes Open Channel Flow Hydraulic Machines Properties of Fluids Fluid Statics

General Aptitude

Numerical Ability Logical Reasoning Verbal Ability