GATE CE
Strength of Materials Or Solid Mechanics
Propped Cantilever Beam
Previous Years Questions

## Marks 1

The fixed end moment of a uniform beam of span $$l$$ fixed at the ends, subjected to a central point load $$P$$ is
A beam fixed at the ends and subjected to lateral loads only is statically indeterminate and the degree of indeterminacy is
The moments at the end $$'A'$$ and $$'B'$$ of a beam $$'AB'$$ where end $$(a)$$ is fixed and $$(b)$$ is hinged, when the end $$(b)$$ sinks by an amoun...

## Marks 2

In a system, two connected rigid bars $$AC$$ and $$BC$$ are of identical length $$L$$ with pin supports at $$A$$ and $$B.$$ The bars are interconnecte...
A steel strip of length, $$L = 200$$ $$mm$$ is fixed at end $$A$$ and rests at $$B$$ on a vertical spring of stiffness, $$k = 2$$ $$N/mm.$$ The steel ...
Two beams are connected by a linear spring as shown in the following figure. For a load $$P$$ as shown in the figure, the percentage of the applied lo...
The axial load (in $$kN$$) in the member $$PQ$$ for the arrangement/assembly shown in the figure given below is ___________ ...
Consider a propped cantilever $$ABC$$ under two loads of magnitude $$P$$ each as shown in figure below. Flexural rigidity of the beam is $$EI$$. T...
Consider a propped cantilever $$ABC$$ under two loads of magnitude $$P$$ each as shown in figure below. Flexural rigidity of the beam is $$EI$$. Th...
For the linear elastic beam shown in the figure, the flexural rigidity, $$EI$$ is $$781250\,\,kN$$ - $${m^2}.$$ When $$w=10$$ $$kN/m,$$ the vertical r...
EXAM MAP
Joint Entrance Examination