Marks 1
1
The plane frame shown in the figure has fixed support at joint A, hinge support at joint F, and roller support at joint I. In the figure, A to I indicate joints of the frame.

If the axial deformations are neglected, the degree of kinematic indeterminacy is _________ (in integer).
GATE CE 2024 Set 1
2
Consider the frame shown in the figure.

If the axial and shear deformations in different members of the frame are assumed to be negligible, the reduction in the degree of kinematical indeterminacy would be equal to
GATE CE 2017 Set 2
3
The kinematic indeterminacy of the plane truss shown in the figure is

GATE CE 2016 Set 2
4
Considering beam as axially rigid, the degree of freedom of a plane frame shown below is

GATE CE 2005
5
The degree of static indeterminacy, $${N_s}$$ and the degree of kinematic indeterminacy, $${N_k}$$ for the plane frame shown below, assuming axial deformations to be negligible, are given by:

GATE CE 2001
6
The kinematic indeterminacy of single bay portal frame fixed at the base is
GATE CE 1994
7
The Kinematic Indeterminacy of plane frame shown below is

GATE CE 1994
8
The degrees of freedom of the following frames is ___________

GATE CE 1993
Marks 2
1
For the plane frame with an overhang as shown below, assuming negligible axial deformation, the degree of static indeterminacy, $$d,$$ and the degree of kinematic indeterminacy, $$k,$$ are

GATE CE 2004
2
The following two statements are made with reference to the planar truss shown below :

$${\rm I}.$$ The truss is statically determinate
$${\rm II}.$$ The truss is kinematically determinate
With reference to the above statements, which of the following applies ?
GATE CE 2000
3
The degree of Kinematic Indeterminacy of the rigid frame with clamped ends at $$A$$ and $$D$$ shown in the fig. is

GATE CE 1997
4
Determine the degrees of freedom of the following frame

GATE CE 1992
5
Determine the degrees of freedom of the following frame.

GATE CE 1987