A $$60mm$$ long and $$6mm$$ thick fillet weld carries a steady load of $$15kN$$ along the weld. The shear strength of the weld material is equal to $$200MPa.$$ The factor of safety is

Twenty degree full depth involute profiled $$19$$-tooth pinion and $$37$$-tooth gear are in mesh. If the module is $$5mm,$$ the center distance between the gear pair will be

A disk clutch is required to transmit $$5$$ $$kW$$ at $$2000$$ $$rpm$$ the disk has a friction lining with Coefficient of friction equal to $$0.25.$$ Bore radius of friction lining is equal to $$25mm.$$ Assume uniform contact pressure of $$1MPa.$$ The value of outside radius of the friction lining is

A $$4$$ $$mm$$ thick sheet is rolled with $$300$$ $$mm$$ diameter rolls to reduce thickness without any change in its width. The friction coefficient at the work-roll interface is $$0.1.$$ The minimum possible thickness of the sheet that can be produced in a single pass is