GATE ME 2006 | GATE ME Year Wise Previous Years Questions

GATE ME 2006

MCQ (Single Correct Answer)

-0.6

A bar having a cross-sectional area of 700 mm² is subjected to axial loads at the positions indicated. The value of stress in the segment BC is GATE ME 2006 Strength of Materials - Simple Stress and Strain Question 14 English

GATE ME 2006 Strength of Materials - Simple Stress and Strain Question 14 English

40 MPa

50 MPa

70 MPa

120 MPa

GATE ME 2006

MCQ (Single Correct Answer)

-0.6

A steel bar of 40 mm × 40 mm square cross-section is subjected to an axial compressive load of 200 kN. If the length of the bar is 2m and E = 200 GPa. The decrement in length of the bar will be

1.25 mm

2.70 mm

4.05 mm

5.40 mm

GATE ME 2006

MCQ (Single Correct Answer)

-0.6

A simply supported beam of span length $$6$$m and $$75$$ mm diameter carries a udl of $$1.5$$ kN/m

What is the maximum value of bending moment?

$$9$$ kN-m

$$6.75$$ kN-m

$$81$$ kN-m

$$125$$ kN-m

GATE ME 2006

MCQ (Single Correct Answer)

-0.6

A planetary gear train has four gears and one carrier. Angular velocities of the gears are $${\omega _1},{\omega _2},{\omega _3},$$ and $${\omega _4}$$ respectively. The carrier rotates with angular velocity $${\omega _5}.$$ GATE ME 2006 Theory of Machines - Gears and Gear Trains Question 17 English

GATE ME 2006 Theory of Machines - Gears and Gear Trains Question 17 English

What is the relation between the angular velocities of Gear $$1$$ and Gear $$4$$?

$${{{\omega _1} - {\omega _5}} \over {{\omega _4} - {\omega _5}}} = 6$$

$${{{\omega _4} - {\omega _6}} \over {{\omega _1} - {\omega _5}}} = 6$$

$${{{\omega _1} - {\omega _2}} \over {{\omega _4} - {\omega _5}}} = - \left( {{2 \over 3}} \right)$$

$${{{\omega _2} - {\omega _5}} \over {{\omega _4} - {\omega _5}}} = - \left( {{8 \over 9}} \right)$$

PREVIOUS NEXT

GATE ME Papers

All year-wise previous year question papers

2025