GATE CE 2024 Set 2 | Construction Materials Question 1 | Construction Material and Management

GATE CE 2024 Set 2

MCQ (More than One Correct Answer)

-0.833

In the context of pavement material characterization, the CORRECT statement(s) is/are

The load penetration curve of CBR test may need origin correction due to the non-vertical penetrating plunger of the loading machine.

The toughness and hardness of road aggregates are determined by Los Angeles abrasion test and aggregate impact test, respectively.

Grading of normal (unmodified) bitumen binders is done based on viscosity test results.

In compacted bituminous mix, Voids in the Mineral Aggregate (VMA) is equal to the sum of total volume of air voids (V_a) and total volume of bitumen (V_b).

GATE CE 2017 Set 2

MCQ (Single Correct Answer)

-0.6

Consider the following statements:
P. Walls of one brick thick are measured in square meters.
Q. Walls of one brick thick are measured in cubic meters.
R. No deduction in the brickwork quantity is made for openings in walls up to 0.1 $$m^2$$ area.
S. For the measurement of excavation from the borrow pit in a fairly uniform ground, dead men are left at suitable intervals.
For the above statements, the correct option is

P-False; Q-True; R- False: S-True

P-False; Q-True: R-False; S-False

P-True; Q-False; R-True; S- False

P-True; Q-False; R-True; S-True

GATE CE Subjects

Engineering Mechanics

Equilibrium of Force Systems Work Energy Principle and Impulse Momentum Equation

Strength of Materials Or Solid Mechanics

Pure Bending Shear Stress In Beams Simple Stresses Complex Stress Centroid and Moment of Inertia Torsion Shear Force and Bending Moment Deflection of Beams Thin Cylinder Strain Energy Method Columns and Struts Propped Cantilever Beam

Structural Analysis

Stability and Static Indeterminacy Methods of Analysis Plastic Analysis Moment Distribution Method Indeterminacy Energy Principle Influence Line Diagram Arches and Cable Slope Deflection Method Truss Matrix Method

Construction Material and Management