ExamSIDE (Powered by ExamGOAL)
Questions
1
GATE CE 2024 Set 2
MCQ (More than One Correct Answer)
+2
-0

In the context of pavement material characterization, the CORRECT statement(s) is/are

A

The load penetration curve of CBR test may need origin correction due to the non-vertical penetrating plunger of the loading machine.

B

The toughness and hardness of road aggregates are determined by Los Angeles abrasion test and aggregate impact test, respectively.

C

Grading of normal (unmodified) bitumen binders is done based on viscosity test results.

D

In compacted bituminous mix, Voids in the Mineral Aggregate (VMA) is equal to the sum of total volume of air voids (Va) and total volume of bitumen (Vb).

2
GATE CE 2017 Set 2
MCQ (Single Correct Answer)
+2
-0.6
Consider the following statements:
P. Walls of one brick thick are measured in square meters.
Q. Walls of one brick thick are measured in cubic meters.
R. No deduction in the brickwork quantity is made for openings in walls up to 0.1 $$m^2$$ area.
S. For the measurement of excavation from the borrow pit in a fairly uniform ground, dead men are left at suitable intervals.
For the above statements, the correct option is
A
P-False; Q-True; R- False: S-True
B
P-False; Q-True: R-False; S-False
C
P-True; Q-False; R-True; S- False
D
P-True; Q-False; R-True; S-True
GATE CE Subjects
Construction Material and Management
Critical Path Method Construction Materials Program Evolution Review Technique
Geomatics Engineering Or Surveying
Levelling Traversing Theodolites and Plane Table Surveying Measurement of Area, Volume and Theory of Errors and Survey Adjustment Field Astronomy and Photogrammetric Surveying Basics of GIS, GPS and Remote Sensing Angular Measurements and Compass Survey Basic Concepts Linear Measurements and Chain Survey
Engineering Mechanics
Equilibrium of Force Systems Work Energy Principle and Impulse Momentum Equation
Hydrology
Precipitation and Frequency of Rainfall Data Evaporation and Transpiration Infiltration Hydrograph Flood Estimation and Flood Routing
Transportation Engineering
Highway Devolopment and Planning Highway Geometric Design Traffic Engineering Highway Materials Pavement Design Railway, Runway and Taxiway Design
Strength of Materials Or Solid Mechanics
Pure Bending Shear Stress In Beams Simple Stresses Complex Stress Centroid and Moment of Inertia Torsion Shear Force and Bending Moment Deflection of Beams Thin Cylinder Strain Energy Method Columns and Struts Propped Cantilever Beam
Reinforced Cement Concrete
Singly Reinforced Sections Workmenship and Fundamentals Doubly Reinforced Sections Flanged Beams Limit State of Collapse Shear Limit State of Collapse Torsion Limit State of Collapse Compression Footings Bond Limit State of Serviceability Prestressed Concrete Slabs
Steel Structures
Materials and Specifications Tension Members Riveted Joints and Bolted Joints Welded Connections Eccentric Connections Compression Members Beams Plate Girder
Irrigation
Gravity Dams and Spillways Water Requirement of Crops
Environmental Engineering
Sources and Coveyances Water Quality Control of Water Treatment of Water Water Demand Waste Water Characteristics Treatment of Sewage Disposal of Sewage Effluent Solid Waste Management Air Pollution Noise Pollution
Engineering Mathematics
Probability and Statistics Calculus Complex Variable Differential Equations Linear Algebra Numerical Methods Vector Calculus Transform Theory
Structural Analysis
Stability and Static Indeterminacy Methods of Analysis Plastic Analysis Moment Distribution Method Indeterminacy Energy Principle Influence Line Diagram Arches and Cable Slope Deflection Method Truss Matrix Method
Geotechnical Engineering
Origin of Soils Definitions and Properties of Soils Classification of Soils and Clay Mineralogy Effective Stress and Permeability Seepage Analysis Compaction of Soil Compressibility and Consolidation Shear Strength of Soil Stress Distribution of Soil Retaining Wall and Earth Pressure Stability of Slopes Shallow Foundation Pile Foundation Soil Stabilization
Fluid Mechanics and Hydraulic Machines
Fluid Pressure and Measurement Fluid Dynamics Boundary Layer Theory Drag and Lift Flow Through Pipes Open Channel Flow Hydraulic Machines Properties of Fluids Fluid Statics
General Aptitude
Numerical Ability Logical Reasoning Verbal Ability
EXAM MAP
Joint Entrance Examination
JEE MainJEE AdvancedWB JEEBITSATMHT CETKCETCOMEDKVITEEEAP EAPCET
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12