Consider a reinforced concrete beam section of 300 mm width and 700 mm depth. The beam is reinforced with the tension steel of $2000 \mathrm{~mm}^2$ area at an effective cover of 50 mm . Concrete in the tension zone is assumed to be cracked. Assume the modular ratio of 12 and Young's modulus of 200 GPa for steel. When the extreme fibre in the compression zone undergoes the strain of 0.0004 due to the applied bending moment, the stress in the steel (in MPa ) is _________ (rounded off to the nearest integer).
Consider the singly reinforced section of a cantilever concrete beam under bending, as shown in the figure (M25 grade concrete, Fe415 grade steel). The stress block parameters for the section at ultimate limit state, as per IS 456: 2000 notations, are given. The ultimate moment of resistance for the section by the Limit State Method is ________ kN.m (round off to one decimal place).
[Note: Here, As is the total area of tension steel bars, b is the width of the section, d is the effective depth of the bars, fck is the characteristic compressive cube strength of concrete, fy is the yield stress of steel, and xu is the depth of neutral axis.]
