In a steady flow through a nozzle, the flow velocity on the nozzle axis is given by $$u = {u_0}\left( {1 + 3x/L} \right),\,\,$$ where $$x$$ is the distance along the axis of the nozzle from its inlet plane and $$L$$ is the length of the nozzle. The time required for a fluid particle on the axis to travel from the inlet to the exit plane of the nozzle is .

Oil in a hydraulic cylinder is compressed from an initial volume $$2{m^3}$$ to $$1.96{m^3}$$. If the pressure of oil in the cylinder changes from $$40$$ $$MPa$$ to $$80$$ $$MPa$$ during compression, the bulk modulus of elasticity of oil is .........

Newton's law of viscosity states that the shear stress in a fluid is proportional to :

The temp distribution within the Laminar thermal boundary layer over a heated isothermal flat plate is given by
$$\left( {T - {T_w}} \right)/\left( {{T_\infty } - {T_w}} \right) = \left( {3/2} \right)\,\,\left( {y/{\delta _t}} \right) - \left( {1/2} \right){\left( {y/{\delta _t}} \right)^3},$$
where $${{T_w}}$$ and $${{T_ \propto }}$$ are the temp of plate and free stream respectively, and $$'y'$$ is the normal distance measuread from the plate. The ratio of Average to the local Nussult number based on the thermal boundary layer thickness $${{\delta _t}}$$ is given by