What is the CORRECT match between the survey instruments/parts of instruments shown in the table and the operations carried out with them?
| Instruments/Parts of instruments | Operations |
|---|---|
| P - Bubble tube | i - Tacheometry |
| Q - Plumb bob | ii - Minor movements |
| R - Tangent screw | iii - Centering |
| S - Stadia cross-wire | iv - Levelling |
To finalize the direction of a survey, four surveyors set up a theodolite at a station P and performed all the temporary adjustments. From the station P, each of the surveyors observed the bearing to a tower located at station Q with the same instrument without shifting it. The bearings observed by the surveyors are 30° 30' 00", 30° 29' 40", 30° 30' 20" and 30° 31' 20". Assuming that each measurement is taken with equal precision, the most probable value of the bearing is
If the number of sides resulting in a closed traverse is increased from three to four, the sum of the interior angles increases by
A surveyor observes a zenith angle of 93° 00′ 00″ during a theodolite survey. The corresponding vertical angle is