1
GATE CE 2024 Set 1
Numerical
+2
-0.833
The figure presents the trajectories of six vehicles within a time-space domain. The number in the parentheses represents a unique identification of each vehicle.
The mean speed (in km/hr) of the vehicles in the entire time-space domain is ____________ (rounded off to the nearest integer).
Your input ____
2
GATE CE 2024 Set 1
Numerical
+2
-0.833
A bird is resting on a point P at a height of 8 m above the Mean Sea Level (MSL). Upon hearing a loud noise, the bird flies parallel to the ground surface and reaches a point Q which is located at a height of 3 m above MSL. The ground surface has a falling gradient of 1 in 2. Ignoring the effects of curvature and refraction, the horizontal distance (in meters) between points P and Q is _______________ (in integer).
Your input ____
3
GATE CE 2016 Set 2
Numerical
+2
-0
A motorist traveling at 100 km/h on a highway needs to take the next exit, which has a
speed limit of 50 km/h. The section of the roadway before the ramp entry has a downgrade
of 3% and coefficient of friction ( f ) is 0.35. In order to enter the ramp at the maximum
allowable speed limit, the braking distance (expressed in m) from the exit ramp is ______
Your input ____
4
GATE CE 2014 Set 1
Numerical
+2
-0
The perception-reaction time for a vehicle travelling at 90 km/h, given the coefficient of
longitudinal friction of 0.35 and the stopping sight distance of 170 m (assume g = 9.81 m/s2),
is _________ seconds.
Your input ____
Questions Asked from Highway Geometric Design (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE CE Subjects
Construction Material and Management
Geomatics Engineering Or Surveying
Levelling Traversing Theodolites and Plane Table Surveying Measurement of Area, Volume and Theory of Errors and Survey Adjustment Field Astronomy and Photogrammetric Surveying Basics of GIS, GPS and Remote Sensing Angular Measurements and Compass Survey Basic Concepts Linear Measurements and Chain Survey
Engineering Mechanics
Hydrology
Transportation Engineering
Strength of Materials Or Solid Mechanics
Reinforced Cement Concrete
Steel Structures
Environmental Engineering
Engineering Mathematics
Structural Analysis
Geotechnical Engineering
Fluid Mechanics and Hydraulic Machines
General Aptitude