1
GATE CE 2025 Set 1
Numerical
+2
-0
In levelling between two points A and B on the opposite banks of a river, the readings are taken by setting the instrument both at $A$ and $B$, as shown in the table. If the $R L$ of $A$ is 150.000 m , the $R L$ of $B$ (in m ) is __________ (rounded off to 3 decimal places).
| Level position | Staff readings | |
| A | B | |
| A | 1.800 | 1.350 |
| B | 1.450 | 0.950 |
Your input ____
2
GATE CE 2023 Set 1
Numerical
+2
-0
Trigonometric levelling was carried out from two stations P and Q to find the reduced level (R. L.) of the top of hillock, as shown in the table. The distance between Stations P and Q is 55 m. Assume Stations P and Q, and the hillock are in the same vertical plane. The R. L. of the top of the hillock (in m) is ____________ (round off to three decimal places).
$$ \begin{array}{|c|c|c|c|} \hline \text { Station } & \begin{array}{c} \text { Vertical } \\ \text { angle of } \\ \text { the top of } \\ \text { hillock } \end{array} & \begin{array}{c} \text { Staff } \\ \text { reading on } \\ \text { benchmark } \end{array} & \begin{array}{c} \text { R.L. of } \\ \text { bench } \\ \text { mark } \end{array} \\ \hline \mathrm{P} & 18^{\circ} 45^{\prime} & 2.340 \mathrm{~m} & \begin{array}{c} 100.000 \\ \mathrm{~m} \end{array} \\ \hline \mathrm{Q} & 12^{\circ} 45^{\prime} & 1.660 \mathrm{~m} & \\ \hline \end{array} $$Your input ____
GATE CE Subjects
Browse all chapters by subject
Structural Analysis
Fluid Mechanics and Hydraulic Machines
Strength of Materials Or Solid Mechanics
Reinforced Cement Concrete
Construction Material and Management
Geotechnical Engineering
Origin of Soils Definitions and Properties of Soils Classification of Soils and Clay Mineralogy Effective Stress and Permeability Seepage Analysis Compaction of Soil Compressibility and Consolidation Shear Strength of Soil Stress Distribution of Soil Retaining Wall and Earth Pressure Stability of Slopes Shallow Foundation Pile Foundation Soil Stabilization
General Aptitude
Environmental Engineering
Steel Structures
Hydrology
Transportation Engineering
Engineering Mathematics
Engineering Mechanics
Geomatics Engineering Or Surveying
Levelling Theodolites and Plane Table Surveying Curves Field Astronomy and Photogrammetric Surveying Traversing Measurement of Area, Volume and Theory of Errors and Survey Adjustment Basics of GIS, GPS and Remote Sensing Basic Concepts Linear Measurements and Chain Survey Angular Measurements and Compass Survey