1
GATE CE 2022 Set 2
Numerical
+2
-0
A pump with an efficiency of 80% is used to draw groundwater from a well for irrigating a flat field of area 108 hectares. The base period and delta for paddy crop on this field are 120 days and 144 cm, respectively. Water application efficiency in the field is 80%. The lowest level of water in the well is 10 m below the ground. The minimum required horse power (h.p.) of the pump is _________. (round off to two decimal places)
(Consider 1 h.p. = 746 W; unit weight of water = 9810 N/m3
Your input ____
2
GATE CE 2017 Set 2
Numerical
+2
-0
The culturable command area of a canal is 10,000 ha. The area grows only two crops-rice in
the Kharif season and wheat in the Rabi season. The design discharge of the canal is based on
the rice requirements, which has an irrigated area of 2500 ha, base period of 150 days and
delta of 130 cm. The maximum permissible irrigated area (in ha) for wheat, with a base period
of 120 days and delta of 50 cm, is_______.
Your input ____
3
GATE CE 2013
MCQ (Single Correct Answer)
+2
-0.6
The transplantation of rice requires 10 days and total depth of water required
during transplantation is 48 cm. During transplantation, there is an effective
rainfall (useful for irrigation) of 8 cm. The duty of irrigation water (in hectare/
cumec) is:
4
GATE CE 2012
MCQ (Single Correct Answer)
+2
-0.6
Wheat crop requires 55 cm of water during 120 days of base period. The total rainfall during this period is 100 mm. Assume the irrigation efficiency to be 60%. The area (in ha) of the land which can be irrigated with a canal flow of 0.01 $$m^3/s$$ is
Questions Asked from Water Requirement of Crops (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE CE Subjects
Construction Material and Management
Geomatics Engineering Or Surveying
Levelling Traversing Theodolites and Plane Table Surveying Measurement of Area, Volume and Theory of Errors and Survey Adjustment Field Astronomy and Photogrammetric Surveying Basics of GIS, GPS and Remote Sensing Angular Measurements and Compass Survey Basic Concepts Linear Measurements and Chain Survey
Engineering Mechanics
Hydrology
Transportation Engineering
Strength of Materials Or Solid Mechanics
Reinforced Cement Concrete
Steel Structures
Environmental Engineering
Engineering Mathematics
Structural Analysis
Geotechnical Engineering
Origin of Soils Definitions and Properties of Soils Classification of Soils and Clay Mineralogy Effective Stress and Permeability Seepage Analysis Compaction of Soil Compressibility and Consolidation Shear Strength of Soil Stress Distribution of Soil Retaining Wall and Earth Pressure Stability of Slopes Shallow Foundation Pile Foundation Soil Stabilization
Fluid Mechanics and Hydraulic Machines
General Aptitude