1
GATE CE 2024 Set 1
Numerical
+2
-0
A bird is resting on a point P at a height of 8 m above the Mean Sea Level (MSL). Upon hearing a loud noise, the bird flies parallel to the ground surface and reaches a point Q which is located at a height of 3 m above MSL. The ground surface has a falling gradient of 1 in 2. Ignoring the effects of curvature and refraction, the horizontal distance (in meters) between points P and Q is _______________ (in integer).
Your input ____
2
GATE CE 2022 Set 2
Numerical
+2
-0
A parabolic vertical crest curve connects two road segments with grades +1.0% and $$-$$2.0%. If a 200 m stopping sight distance is needed for a driver at a height of 1.2 m to avoid an obstacle of height 0.15 m, then the minimum curve length should be _________ m. (round off to the nearest integer)
Your input ____
3
GATE CE 2016 Set 2
Numerical
+2
-0
A motorist traveling at 100 km/h on a highway needs to take the next exit, which has a
speed limit of 50 km/h. The section of the roadway before the ramp entry has a downgrade
of 3% and coefficient of friction ( f ) is 0.35. In order to enter the ramp at the maximum
allowable speed limit, the braking distance (expressed in m) from the exit ramp is ______
Your input ____
4
GATE CE 2014 Set 1
Numerical
+2
-0
The perception-reaction time for a vehicle travelling at 90 km/h, given the coefficient of
longitudinal friction of 0.35 and the stopping sight distance of 170 m (assume g = 9.81 m/s2),
is _________ seconds.
Your input ____
GATE CE Subjects
Browse all chapters by subject
Engineering Mechanics
General Aptitude
Transportation Engineering
Hydrology
Environmental Engineering
Steel Structures
Engineering Mathematics
Structural Analysis
Geomatics Engineering Or Surveying
Measurement of Area, Volume and Theory of Errors and Survey Adjustment Curves Theodolites and Plane Table Surveying Levelling Traversing Basics of GIS, GPS and Remote Sensing Field Astronomy and Photogrammetric Surveying Linear Measurements and Chain Survey Angular Measurements and Compass Survey Basic Concepts
Reinforced Cement Concrete
Fluid Mechanics and Hydraulic Machines
Construction Material and Management
Strength of Materials Or Solid Mechanics
Geotechnical Engineering
Origin of Soils Definitions and Properties of Soils Classification of Soils and Clay Mineralogy Effective Stress and Permeability Seepage Analysis Compaction of Soil Compressibility and Consolidation Shear Strength of Soil Stress Distribution of Soil Retaining Wall and Earth Pressure Stability of Slopes Shallow Foundation Pile Foundation Soil Stabilization