1
GATE CE 2023 Set 1
Numerical
+1
-0

Consider the fillet-welded lap joint shown in the figure (not to scale). The length of the weld shown is the effective length. The welded surfaces meet at right angle. The weld size is 8 mm, and the permissible stress in the weld is 120 MPa. What is the safe load P (in kN, rounded off to one decimal place) that can be transmitted by this welded joint? ___________

GATE CE 2023 Set 1 Steel Structures - Welded Connections Question 1 English
Your input ____
2
GATE CE 2022 Set 1
MCQ (Single Correct Answer)
+1
-0.33

A weld is used for joining an angle section ISA 100 mm $$\times$$ 100 mm $$\times$$ 10 mm to a gusset plate of thickness 15 mm to transmit a tensile load. The permissible stress in the angle is 150 MPa and the permissible shear stress on the section through the throat of the fillet weld is 108 MPa. The location of the centroid of the angle is represented by Cyy in the figure, where Cyy = 28.4 mm. The area of cross-section of the angle is 1903 mm2. Assuming the effective throat thickness of the weld to be 0.7 times the given weld size, the lengths L1 and L2 (rounded off to the nearest integer) of the weld required to transmit a load equal to the full strength of the tension member are, respectively

GATE CE 2022 Set 1 Steel Structures - Welded Connections Question 2 English

A
541 mm and 214 mm
B
214 mm and 541 mm
C
380 mm and 151 mm
D
151 mm and 380 mm
3
GATE CE 2011
MCQ (Single Correct Answer)
+1
-0.3
For the fillet weld of size $$'S'$$ shown in the adjoining figure the effective throat thickness is GATE CE 2011 Steel Structures - Welded Connections Question 4 English
A
$$0.61$$ $$S$$
B
$$0.65$$ $$S$$
C
$$0.70$$ $$S$$
D
$$0.75$$ $$S$$
GATE CE Subjects
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12