A $$3$$-phase voltage source inverter is supplied from a $$600V$$ $$DC$$ source as shown in the figure below. For a star connected resistive load of $$20\,\,\Omega $$per phase, the load power for $${120^ \circ }$$ device conduction, in $$kW,$$ is ___________.

A source is supplying a load through a 2-phase, 3-wire transmission system as shown in figure below. The instantaneous voltage and current in phase-a are $$v_{an}=220\sin\left(100\mathrm{πt}\right)\;V$$ and $$i_a=10\sin\left(100\mathrm{πt}\right)\;A$$, respectively. Similarly for phase-b the instantaneous voltage and current are $$v_{bn}=220\cos\left(100\mathrm{πt}\right)\;V$$ and $$i_b=10\cos\left(100\mathrm{πt}\right)\;A$$, respectively. The total instantaneous power flowing form the source to the load is

A load is supplied by a $$230$$ $$V,$$ $$50$$ $$Hz$$ source. The active power $$P$$ and the reactive power $$Q$$ consumed by the load are such that $$1$$ $$kW$$ $$ \le P \le 2\,kW\,\,$$ and $$\,1\,\,kVAR \le 2\,\,kVAR.\,\,$$ A capacitor connected across the load for power factor correction generates $$1$$ $$kVAR$$ reactive power. The worst case power factor after power factor correction is

The figure shows the single line diagram of a power system with a double circuit transmission line. The expression for electrical power is $$\,1.5\,\,\sin \delta ,\,\,$$ where $$\delta $$ is the rotor angle. The system is operating at the stable equilibrium point with mechanical power equal to $$1$$ pu. If one of the transmission line circuits is removed, the maximum value of $$\delta ,$$ as the rotor swings is $$1.221$$ radian. If the expression for electrical power with one transmission line circuit removed is $$\,{P_{\max }}\,\sin \delta ,\,\,$$ the valueof $${P_{\max }}\,,$$ in pu is _________.