Two three-phase transformers are realized using single-phase transformers as shown in the figure. The phase difference (in degree) between voltages V₁ and V₂ is _______.

The figure shows the per-phase equivalent circuit of a two-pole three-phase induction motor operating at 50 Hz. The 'air-gap' voltage, V_g across the magnetizing inductance, is 210V_rms, and the slip, s, is 0.05. The torque (in Nm) produced by the motor is ________.

A 4-pole, separately excited, wave wound DC machine with negligible armature resistance is rated for 230 V and 5 kW at a speed of 1200 rpm. If the same armature coils are reconnected to form a lap winding, what is the rated voltage (in volts) and power (in kW) respectively at 1200 rpm of the reconnected machine if the field circuit is left unchanged?

With an armature voltage of 100 V and rated field winding voltage, the speed of a separately excited DC motor driving a fan is 1000 rpm, and its armature current is 10 A. The armature resistance is 1 Ω. The load torque of the fan load is proportional to the square of the rotor speed. Neglecting rotational losses, the value of the armature voltage (in Volt) which will reduce the rotor speed to 500 rpm is ______.