A shunt-connected DC motor operates at its rated terminal voltage. Its no-load speed is 200 radian/second. At its rated torque of 500 Nm, its speed is 180 radian/second. The motor is used to directly drive a load whose load torque T_L depends on its rotational speed $$\omega_r$$ (in radian/second), such that $$T_L=2.78\times\omega_r$$. Neglecting rotational losses, the steady-state speed (in radian/second) of the motor, when it drives this load, is _______.

With an armature voltage of 100 V and rated field winding voltage, the speed of a separately excited DC motor driving a fan is 1000 rpm, and its armature current is 10 A. The armature resistance is 1 Ω. The load torque of the fan load is proportional to the square of the rotor speed. Neglecting rotational losses, the value of the armature voltage (in Volt) which will reduce the rotor speed to 500 rpm is ______.

Two three-phase transformers are realized using single-phase transformers as shown in the figure. The phase difference (in degree) between voltages V₁ and V₂ is _______.

A balanced (positive sequence) three-phase AC voltage source is connected to a balanced, star connected load through a star-delta transformer as shown in the figure. The line-to-line voltage rating is 230 V on the star side, and 115 V on the delta side. If the magnetizing current is neglected and $${\overline{\mathrm I}}_\mathrm s=100\angle0^\circ$$, then what is the value of $${\overline{\mathrm I}}_\mathrm p$$ in Ampere?