A fully controlled converter bridge feeds a highly inductive load with ripple free load current. The input supply $$\left( {{V_s}} \right)$$ to the bridge is a sinusoidal source. Triggering angle of the bridge converter is $$\,\alpha = {30^0}.$$ The input power factor of the bridge is ____________.

A step-up chopper is used to feed a load at $$400$$ $$V$$ $$dc$$ from a $$250$$ $$V$$ $$dc$$ source. The inductor current is continuous. If the ‘off’ time of the switch is $$20\,\,\mu s,$$ the switching frequency of the chopper in $$kHz$$ is ________.

A single-phase $$SCR$$ based $$ac$$ regulator is feeding power to a load consisting of $$5\,\,\Omega $$ resistance and $$16$$ $$mH$$ inductance. The input supply is $$230$$ $$V,$$ $$50$$ $$Hz$$ $$ac.$$ The maximum firing angle at which the voltage across the device becomes zero all throughout and the $$rms$$ value of current through $$SCR,$$ under this operating condition, are

A three phase star-connected load is drawing power at a voltage of 0.9 pu and 0.8 power factor lagging. The three phase base power and base current are 100 MVA and 437.38 A respectively. The line-to-line load voltage in kV is __________.