A step-up chopper is used to feed a load at $$400$$ $$V$$ $$dc$$ from a $$250$$ $$V$$ $$dc$$ source. The inductor current is continuous. If the ‘off’ time of the switch is $$20\,\,\mu s,$$ the switching frequency of the chopper in $$kHz$$ is ________.

A single-phase $$SCR$$ based $$ac$$ regulator is feeding power to a load consisting of $$5\,\,\Omega $$ resistance and $$16$$ $$mH$$ inductance. The input supply is $$230$$ $$V,$$ $$50$$ $$Hz$$ $$ac.$$ The maximum firing angle at which the voltage across the device becomes zero all throughout and the $$rms$$ value of current through $$SCR,$$ under this operating condition, are

A three phase star-connected load is drawing power at a voltage of 0.9 pu and 0.8 power factor lagging. The three phase base power and base current are 100 MVA and 437.38 A respectively. The line-to-line load voltage in kV is __________.

A three phase, $$100$$ $$MVA,$$ $$25$$ $$kV$$ generator has solidly grounded neutral. The positive, negative, and the zero sequence reactance's of the generator are $$0.2$$ $$pu$$, $$0.2$$ $$pu$$, and 0.05 $$pu,$$ respectively, at the machine base quantities. If a bolted single phase to ground fault occurs at the terminal of the unloaded generator, the fault current in amperes immediately after the fault is __________