1
GATE EE 2001
MCQ (Single Correct Answer)
+2
-0.6
Consider the model shown in figure of a transmission line with a series capacitor at its mid-point. The maximum voltage on the line is at the location GATE EE 2001 Power System Analysis - Parameters and Performance of Transmission Lines Question 47 English
A
$${P_1}$$
B
$${P_2}$$
C
$${P_3}$$
D
$${P_4}$$
2
GATE EE 2001
MCQ (Single Correct Answer)
+2
-0.6
The conductors of a $$10$$ km long, single phase, two wire line are separated by a distance of $$1.5$$ m. The diameter of each conductor is $$1$$ cm. If the conductors are of copper, the inductance of the circuit is
A
$$50.0$$ mH
B
$$45.3$$ mH
C
$$23.8$$ mH
D
$$19.6$$ mH
3
GATE EE 2001
Subjective
+5
-0
A 132 kV transmission line AB is connected to a cable BC. The characteristic impedances of the overhead line and the cable are 400$$\Omega $$ and 80$$\Omega $$ respectively. Assume that these are purely resistive. A 250 kV switching surge travels from A to B.

(a) Calculate the value of this voltage surge when it first reaches C.

(b) Calculate the value of the reflected component of this surge when the first reflection reaches A.

(c) Calculate the surge current in the cable BC.

4
GATE EE 2001
Subjective
+5
-0
A synchronous generator is connected to an infinite bus through a lossless double circuit transmission line. The generator is delivering 1.0 per unit power at a load angle of $${30^0}$$ when a sudden fault reduces the peak power that can be transmitted to 0.5 per unit. After clearance of fault, the peak power that can be transmitted becomes 1.5 per unit. Find the critical clearing angle.
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
CBSE
Class 12