In a single pass drilling operation, a through hole of $$15$$ $$mm$$ diameter is to be drilled in a steel plate of $$50$$ $$mm$$ thickness. Drill spindle speed is $$500$$ $$rpm,$$ feed is $$0.2$$ $$mm/rev$$ and drill point angle is $${118^ \circ }.$$ Assuming $$2$$ $$mm$$ clearance at approach and exit, the total drill time (in seconds) is

Match the following metal forming processes with their associated stresses in the Work-piece

Calculate the punch size in $$mm,$$ for a circular blanking operation for which details are given below.

Size of the blank $$25$$ $$mm$$
Thickness of the sheet $$2$$ $$mm$$
Radial clearance between punch and die $$0.06$$ $$mm,$$ Die allowance $$0.05$$ $$mm$$

A $$CNC$$ vertical milling machine has to cut a straight slot of $$10$$ $$mm$$ width and $$2$$ $$mm$$ depth by a cutter of $$10$$ $$mm$$ diameter between points $$(0, 0)$$ and $$(100, 100)$$ on the $$XY$$ plane (dimensions in $$mm$$). The feed rate used for milling is $$50$$ $$mm/min.$$ Milling time for the slot (in seconds) is