1
GATE ME 2012
MCQ (Single Correct Answer)
+2
-0.6
A large tank with a nozzle attached contains three immiscible, inviscid fluids as shown. Assuming that the changes in $${h_1},\,\,{h_2}$$ and $${h_3}$$ are negligible, the instantaneous discharge velocity is GATE ME 2012 Fluid Mechanics - Fluid Dynamics Question 35 English
A
$$\sqrt {2g{h_3}\left( {1 + {{{\rho _1}} \over {{\rho _3}}}\,{{{h_1}} \over {{h_3}}} + {{{\rho _2}} \over {{\rho _3}}}{{{h_2}} \over {{h_3}}}} \right)} $$
B
$$\sqrt {2g\left( {{h_1} + {h_2} + {h_3}} \right)} $$
C
$$\sqrt {2g\left( {{{{\rho _1}{h_1} + {\rho _2}{h_2} + {\rho _3}{h_3}} \over {{\rho _1} + {\rho _2} + {\rho _3}}}} \right)} $$
D
$$\sqrt {2g\left( {{{{\rho _1}{h_2}{h_3} + {\rho _2}{h_3}{h_1} + {\rho _3}{h_1}{h_2}} \over {{\rho _1}{h_1} + {\rho _2}{h_2} + {\rho _3}{h_3}}}} \right)} $$
2
GATE ME 2012
MCQ (Single Correct Answer)
+2
-0.6
An incompressible fluid flows over a flat plate with zero pressure gradient. The boundary layer thickness is $$1mm$$ at a location where the Reynolds number is $$1000$$. If the velocity of the fluid alone is increased by a factor of $$4,$$ then the boundary layer thickness sat the same location, in $$mm$$ will be
A
$$4$$
B
$$2$$
C
$$0.5$$
D
$$0.25$$
3
GATE ME 2012
MCQ (Single Correct Answer)
+1
-0.3
Which one of the following configurations has the highest fin effectiveness?
A
Thin, closely spaced fins
B
Thin, widely spaced fins
C
Thick, widely spaced fins
D
Thick, closely spaced fins
4
GATE ME 2012
MCQ (Single Correct Answer)
+1
-0.3
For an opaque surface, the absorptivity $$\left( \alpha \right),$$ transmissivity $$\left( \tau \right)$$ and reflectivity $$\left( \rho \right)$$ are related by the equation:
A
$$\alpha + \rho = \tau $$
B
$$\rho + \alpha + \tau = 0$$
C
$$\alpha + \rho = 1$$
D
$$\alpha + \rho = 0$$
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12