A three-phase fully controlled bridge converter is fed through star-delta transformer as shown in the figure.

The converter is operated at a firing angle of $${30^0}.$$ Assuming the load current $$\left( {{{\rm I}_0}} \right)$$ to be virtually constant at $$1$$ $$p.u.$$ and transformer to be an ideal one, the input phase current waveform is

A single - phase voltage source inverter shown in figure is feeding power to load. The triggering pulses of the devices are also shown in the figure.

If the load current is sinusoidal and is zero at $$0,\,\,\pi ,2\pi ....,$$ the node voltage $${V_{AO}}$$ has the waveform

In a long transmission line with $$r, l, g$$ and $$𝑐$$ are the resistance, inductance, shunt conductance and capacitance per unit length respectively, the condition for distortionless transmission is

The figure shows the single line diagram of a single machine infinite bus system.

The inertia constant of the synchronous generator $$𝐻 = 5$$ $$MW-s/MVA.$$ Frequency is $$50Hz.$$ Mechanical power is $$1$$ pu. The system is operating at the stable equilibrium point with rotor angle $$\delta $$ equal to $${30^ \circ }$$. A three phase short circuit fault occurs at a certain location on one of the circuits of the double circuit transmission line. During fault, electrical power in pu is $$\,{P_{\max }}\,\,\sin \delta .\,\,\,$$. If the values of $$\delta $$ and $$d$$$$\delta $$$$/dt$$ at the instant of fault clearing are $${45^ \circ }$$ and $$3.762$$ radian/s respectively, then $$\,{P_{\max }}$$ (in pu) is _________.