1
GATE EE 2014 Set 3
Numerical
+2
-0
A separately excited 300 V DC shunt motor under no load runs at 900 rpm drawing an armature current of 2 A. The armature resistance is 0.5 $$\Omega$$ and leakage inductance is 0.01 H. When loaded, the armature current is 15 A. Then the speed in rpm is _____
Your input ____
2
GATE EE 2014 Set 3
MCQ (Single Correct Answer)
+2
-0.6
The parameters measured for a 220V/110V, 50 Hz, single-phase transformer are:

Self inductance of primary winding = 45 mH
Self inductance of secondary winding = 30 mH
Mutual inductance between primary and secondary windings = 20 mH

Using the above parameters, the leakage (Ll1 , Ll2) and magnetizing (Lm) inductances as referred to primary side in the equivalent circuit respectively, are
A
5mH, 20mH and 40mH
B
5mH, 80mH and 40mH
C
25mH, 10mH and 20mH
D
45mH, 30mH and 20mH
3
GATE EE 2014 Set 3
MCQ (Single Correct Answer)
+2
-0.6
The mean thickness and variance of silicon steel laminations are 0.2 mm and 0.02 respectively. The varnish insulation is applied on both the sides of the laminations. The mean thickness of one side insulation and its variance are 0.1 mm and 0.01 respectively. If the transformer core is made using 100 such varnish coated laminations, the mean thickness and variance of the core respectively are
A
30 mm and 0.22
B
30 mm and 2.44
C
40 mm and 2.44
D
40 mm and 0.24
4
GATE EE 2014 Set 3
MCQ (Single Correct Answer)
+2
-0.6
An open circuit test is performed on 50 Hz transformer, using variable frequency source and keeping V/f ratio constant, to separate its eddy current and hysteresis losses. The variation of core loss/frequency as function of frequency is shown in the figure GATE EE 2014 Set 3 Electrical Machines - Transformers Question 63 English The hysteresis and eddy current losses of the transformer at 25 Hz respectively are
A
250 W and 2.5 W
B
250 W and 62.5 W
C
312.5 W and 62.5 W
D
312.5 W and 250 W
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12