1
GATE ME 2024
MCQ (Single Correct Answer)
+1
-0.33

The change in kinetic energy $\Delta E$ of an engine is $300$ J, and minimum and maximum shaft speeds are $\omega_{min} = 220$ rad/s and $\omega_{max} = 280$ rad/s, respectively. Assume that the torque-time function is purely harmonic. To achieve a coefficient of fluctuation of $0.05$, the moment of inertia (in kg.m$^2$) of the flywheel to be mounted on the engine shaft is

A

0.113

B

0.096

C

0.071

D

0.053

2
GATE ME 2024
MCQ (Single Correct Answer)
+1
-0.33

A linear spring-mass-dashpot system with a mass of 2 kg is set in motion with viscous damping. If the natural frequency is 15 Hz, and the amplitudes of two successive cycles measured are 7.75 mm and 7.20 mm, the coefficient of viscous damping (in N.s/m) is

A

4.41

B

7.51

C

2.52

D

6.11

3
GATE ME 2024
Numerical
+2
-1.33

The Levi type-A train illustrated in the figure has gears with module $m = 8 \text{ mm/tooth}$. Gears 2 and 3 have 19 and 24 teeth respectively. Gear 2 is fixed and internal gear 4 rotates at 20 rev/min counter-clockwise. The magnitude of angular velocity of the arm is _________ rev/min. (rounded off to 2 decimal places)

GATE ME 2024 Theory of Machines - Gears and Gear Trains Question 4 English
Your input ____
4
GATE ME 2024
Numerical
+2
-1.33

At the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a constant rate ω = 7 rad/s. Pin P on link OD slides in the slot BC of link ABC which is hinged at A, and causes a clockwise rotation of the link ABC. The magnitude of angular velocity of link ABC for this instant is _________ rad/s (rounded off to 2 decimal places).

GATE ME 2024 Theory of Machines - Analysis of Plane Mechanisms Question 5 English
Your input ____
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12