A clutch has outer and inner diameters $$100mm$$ and $$40mm$$ respectively. Assuming a uniform pressure of $$2MPa$$ and coefficient of friction of inner material $$0.4,$$ the torque carrying capacity of the clutch is

One tooth of gear having $$4$$ module and $$32$$ teeth is shown in the figure. Assume that the gear tooth and the corresponding tooth space make equal intercepts on the pitch circumference.

The dimensions $$' a '$$ and $$' b '$$ respectively, are closest to

A journal bearing has a shaft diameter of $$40mm$$ and a length of $$40mm.$$ The shaft is rotating at $$20$$ $$rad/s$$ and viscocity of the lubricant is $$20mPa.s.$$ The clearance is $$0.020mm.$$ The loss of the torque due to viscocity of the lubricant is approximately

Match the type of gears with their most appropriate description

Type of gear
(P)$$\,\,\,\,\,$$ Helical
(Q)$$\,\,\,\,\,$$ Spiral Bevel
(R)$$\,\,\,\,\,$$ Hypoid
(S)$$\,\,\,\,\,$$ Rack and pinion

Description
1.$$\,\,\,\,\,$$ Axes non parallel a and non intersecting
2$$\,\,\,\,\,$$. Axes parallel and teeth are inclined to the axis
3.$$\,\,\,\,\,$$ Axes parallel and teeth are parallel to the axis
4.$$\,\,\,\,\,$$ Axes are perpendicular and intersecting and teeth are inclined to the axis
5.$$\,\,\,\,\,$$ Axes are perpendicular and used for large speed reduction
6.$$\,\,\,\,\,$$ Axes parallel and one of the gears has infinite radius