A two dimensional fluid element rotates like a rigid body. At a point with in the element, the pressure is $$1$$ unit. Radius of the Mohr's circle, charactering the state of stress at the point, is

Steady two dimensional heat conduction takes place in the body shown in the fig below. The normal temperature gradients over surface $$P$$ and $$Q$$ can be considered to be uniform. The temperature gradient $$\partial T/\partial x = $$ at surface $$Q$$ is equal to $$10$$ $$K/m.$$ surfaces $$P$$ and $$Q$$ are maintained at constant temperatures as shown in the fig. While the remaining part of the boundary is insulated . The body has a constant thermal conductivity of $$0.1$$ $$W/mk$$, the value of $$\partial T/\partial x$$ and $$\partial T/\partial y$$ at surface $$P$$ are

For the three dimensional object shown in the fig below. Five faces are insulated. The sixth face $$(PQRS),$$ which is not insulted, interacts thermally with the ambient , with a convective heat transfer coefficient of $$10W/{m^2}K.$$ The ambient temperature is $${30^ \circ }C$$. Heat is uniformly generated inside the object at the rate of $$100W/{m^3}.$$ Assuming the face $$PQRS$$ to be at uniform temperature, its steady state temp is

For flow of fluid over a heated plate, the following fluid properties are known: Viscosity $$=0.001Pa.s;$$ Specific heat at constant pressure $$=1$$ $$kJ/kgK;$$ Thermal conductivity $$=$$ $$W/mK,$$ The hydrodynamic boundary layer thickness at a specified location on the plate is $$1mm,$$ thermal boundary layer thickness at the same location is