1
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A $$200 \times 100 \times 50$$ mm steel block is subjected to a hydrostatic pressure of $$15$$ MPa. The Young's modulus and Poisson's ratio of the material are 200 GPa and $$0.3$$ respectively. The change in the volume of the block in mm3 is
A
$$85$$
B
$$90$$
C
$$100$$
D
$$110$$
2
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
A shaft subjected to torsion experiences a pure shear stress $$\tau $$ on the surface. The maximum principal stress on the surface which is at $$45$$0 to the axis will have a value
A
$$\tau \,\cos \,\,{45^ \circ }$$
B
$$2\tau \,\cos \,\,{45^ \circ }$$
C
$$\tau \,{\cos ^2}\,\,{45^ \circ }$$
D
$$2\tau \,si{n^2}\,\,{45^ \circ }\,\,\cos \,{45^ \circ }$$
3
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
The state of stress at a point P in a two dimensional loading is such that the Mohr's circle is a point located at 175 MPa on the positive normal stress axis.

The maximum and minimum principal stresses respectively from the Mohr's circle are

A
$$+$$ 175 MPa, $$-$$ 175 MPa
B
$$+$$ 175 MPa, $$+$$ 175 MPa
C
0, $$-$$ 175 MPa
D
$$0, 0$$
4
GATE ME 2003
MCQ (Single Correct Answer)
+2
-0.6
The state of stress at a point P in a two dimensional loading is such that the Mohr's circle is a point located at 175 MPa on the positive normal stress axis.

The distance of maximum and minimum principal stresses at the point ''P'' from the Mohr's circle are

A
0, 90o
B
90o, 0
C
45o, 135o
D
all directions
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12