Match the following
List - $${\rm I}$$
(a)$$\,\,\,\,\,$$ Automobile wheel mounting on axle
(b)$$\,\,\,\,\,$$ High speed grinding spindle
(c)$$\,\,\,\,\,$$ $${\rm IC}$$ - Engine connecting rod
(d)$$\,\,\,\,\,$$ Leaf spring eye mounting

List - $${\rm II}$$
1.$$\,\,\,\,\,$$ Magneto bearing
2.$$\,\,\,\,\,$$ Angular contact bearing
3.$$\,\,\,\,\,$$ Taper roller bearing
4.$$\,\,\,\,\,$$ Hydrodynamic journal bearing
5.$$\,\,\,\,\,$$ Sintered metal bearing
6.$$\,\,\,\,\,$$ Teflon/Nylon bush

To restore stable operating condition in a hydrodynamic journal bearing, when it encounters higher magnitude loads.

$$3$$ blocks of $${B_1},\,\,{B_2},\,\,{B_3}$$ are to be inserted in a channel of width $$'S'$$ maintaining a minimum gap of width $$T=0.125mm,$$ as shown in fig. For $$P = 18.75 \pm 0.08,\,$$ $$\,Q = 25.00 \pm 0.12,\,$$ $$\,R = 28.125 \pm 0.1$$ and $$S=72.35+X.$$ The tolerance $$' X '$$ is _______________.

A metal strip is to be rolled from an initial wrought thickness of $$3.5$$ $$mm$$ to a final rolled thickness of $$2.5$$ $$mm$$ in a single pass rolling mill having rolls of $$250$$ $$mm$$ diameter. The strip is $$450$$ $$mm$$ wide. The average coefficient of friction in the roll gap is $$0.08$$. Taking plane strain low stress of $$140$$ $$MPa,$$ for the metal and assuming negligible spreading, the roll separating force is . . . . . . . . .