A cutting tool has a nose radius of $$1.8mm$$. The feed rate for a theoretical surface roughness of $${R_t} = 5$$ microns is

In a turning trail using orthogonal tool geometry, a chip length of $$84mm$$ was obtained for an uncut chip length of $$200mm.$$ The cutting conditions were $$V=30m/min,$$ $${t_1} = 0.5mm,$$ rake angle $$=20deg,$$ cutting tool is $$HSS.$$ Estimate shear plane angle, chip thickness and the shear plane angle for minimum chip strain.

A Throwaway carbide insert was used to machine a steel work pieces with a cutting speed of $$60$$ $$m/min,$$ tool life of $$40$$ minutes was observed, when the cutting speed was increased to $$100$$ $$m/min,$$ the tool life decreased to $$10$$ minutes. The cutting speed for maximum productivity, if tool change time is $$2$$ minutes is

Helix angle of fast helix drill is normally