An average-reading digital multimeter reads $$10V$$ when fed with a triangular wave, symmetric about the time axis. For the same input an rms reading meter will read.

The figure shows a three phase delta connected load supplied from a $$400V,$$ $$50Hz,$$ $$3\phi $$ balanced source. The pressure coil and current coil of a wattmeter are connected to the load as shown. With the coil polarities suitably selected to ensure a positive deflection. The wattmeter reading will be.

The two inputs of a $$CRO$$ are fed with two stationary periodic signals. In the $$X$$-$$Y$$ mode, the screen shows a figure which changes from ellipse to circle and back to ellipse with its major axis changing orientation slowly and repeatedly. The following inference can be made from this.

A $$200$$ $$V,$$ $$50$$ $$Hz,$$ single-phase induction motor has the following connection diagram and winding orientations shown. $$MM'$$ is the axis of the main stator winding $$\left( {{M_1}{M_2}} \right)$$ and $$AA'$$ is that of the auxiliary winding $$\left( {{A_1}{A_2}} \right).$$ Directions of the winding axis indicate direction of flux when currents in the windings are in the directions shown. Parameters of each winding are indicated. When switch $$S$$ is closed, the motor