In a machining operation, if the generatrix and directrix both are straight lines, the surface obtained is

A shaft of length $$90$$ $$mm$$ has a tapered portion of length $$55$$ $$mm.$$ The diameter of the taper is $$80$$ $$mm$$ at one end and $$65$$ $$mm$$ at the other. If the taper is made by tailstock set over method, the taper angle and the set over respectively are.

In a $$CNC$$ milling operation, the tool has to machine the circular arc from point $$(20, 20)$$ to $$(10, 10)$$ at sequence number $$5$$ of the $$CNC$$ part program. If the center of the arc is at $$(20, 10)$$ and the machine has incremental mode of defining position coordinates, the correct tool path command is

For the overhanging beam shown in figure, the magnitude of maximum bending moment (in kN-m) is ________