Orthogonal turning of a mild steel tube with a tool of rake angle $${10^0}$$ is carried out at a feed of $$0.14$$ $$mm/rev.$$ If the thickness of the chip produced is $$0.28mm,$$ the values of shear angle and shear strain will be respectively.

In a machining operation, if the generatrix and directrix both are straight lines, the surface obtained is

A shaft of length $$90$$ $$mm$$ has a tapered portion of length $$55$$ $$mm.$$ The diameter of the taper is $$80$$ $$mm$$ at one end and $$65$$ $$mm$$ at the other. If the taper is made by tailstock set over method, the taper angle and the set over respectively are.

In a $$CNC$$ milling operation, the tool has to machine the circular arc from point $$(20, 20)$$ to $$(10, 10)$$ at sequence number $$5$$ of the $$CNC$$ part program. If the center of the arc is at $$(20, 10)$$ and the machine has incremental mode of defining position coordinates, the correct tool path command is