In a shear cutting operation, a sheet of $$5mm$$ thickness is cut along a length of $$200mm.$$ The cutting blade is $$400mm$$ long and zero-shear $$(S=0)$$ is provided on the edge. The ultimate shear strength of the sheet is $$100$$ $$MPa$$ and penetration to thickness ratio is $$0.2.$$ Neglect friction

A shear of $$20mm$$ $$(S=20mm)$$ is now provided on the blade. Assuming force $$Vs$$ displacement curve to be trapezoidal, the maximum force (in $$kN$$) exerted is

A shaft has a dimension $$\phi $$ $${35^{\matrix{ { - 0.009} \cr { - 0.025} \cr } }}$$. The respective values of fundamental deviation and tolerance are

A taper hole is inspected using a $$CMM,$$ with a probe of $$2mm$$ diameter. At a height, $$Z=10mm$$ from the bottom, $$5$$ points are touched and a diameter of circle (not compensated for probe size) is obtained as $$20mm.$$ similarly, a $$40mm$$ diameter is btained at a height $$Z=40mm.$$ The smaller diameter (in $$mm$$) of hole at $$Z=0$$ is

In a $$CNC$$ program block, $$N002\,\,\,\,G02\,\,\,\,G91\,\,\,\,X40\,\,\,\,Z40....,\,\,\,\,G02\,\,\,\,\& \,\,\,\,G91$$ refer to