In a gating system, the ratio $$1:2:4$$ represents

For the case of molding, it is decided to replace a spherical riser of diameter $$100$$ $$mm$$ by a cylindrical riser. Determine size of the cylindrical riser that will have the identical solidification time. Assume blind risering & ratio of height to radius of cylinder is $$2.$$

Two steel bars each of diameter $$10mm$$ are coaxially friction welded end to end at an axial pressure of $$200MPa$$ and rotational speed of $$400rpm$$. The coefficient of friction between the mating faces of the rotating bars is $$0.50.$$ The torque is assumed to act at the $$3/{4^{th}}$$ radius of the rotating bar. The power (in $$kW$$) consumed at the interface of the welding is

For tool $$A,$$ Taylor’s tool life exponent $$(n)$$ is $$0.45$$ and constant $$(K)$$ is $$90.$$ Similarly for tool $$B,$$ $$n=0.3$$ and $$K=60.$$ The cutting speed (in $$m/min$$) above which tool $$A$$ will have a higher tool life than tool $$B$$ is