The pressure gauges $${G_1}$$ and $${G_2}$$ installed on the system show pressures of $${P_{G1}} = 5.00$$ bar and $${P_{G2}} = 1.00$$ bar. The value of unknown pressure $$P$$ is

The pressure gauges $${G_1}$$ and $${G_2}$$ installed on the system shown pressures of $${P_{G1}} = 5.00$$ bar and $${P_{G2}} = 1.00$$ bar. The value of unknown pressure $$P$$ is

For a fluid flow through a divergent pipe of length $$L$$ having inlet and outlet radii of $${R_1}$$ and $${R_2}$$ respectively and a constant flow rate of $$Q,$$ assuming the velocity to be axial and uniform at any cross- section , the acceleration at the exit is

An incompressible fluid (kinematic viscosity $$ = 7.4 \times {10^{ - 7}}\,\,{m^2}/s,$$ specific gravity, $$0.88$$) is held between two parallel plates. If the top plate is moved with a velocity of $$0.5$$ $$m/s$$ while the bottom one is held stationary, the fluid attains a linear velocity profile in the gap of $$0.5$$ $$mm$$ between these plates; the shear stress in Pascal on the surface of bottom plate is :