The figure shows a pin-jointed plane truss loaded at the point M by hanging a mass of 100 kg. The member LN of the truss is subjected to a load of v

For air flow over a flat plate, velocity $$(U)$$ and boundary layer thickness $$\left( \delta \right)$$ can be expressed respectively, as $$${U \over {{U_\infty }}} = {3 \over 2}{y \over \delta } - {1 \over 2}{\left( {{y \over \delta }} \right)^3}\,\,\,\,;\,\,\,\,\delta = {{4.64x} \over {\sqrt {{{{\mathop{\rm Re}\nolimits} }_x}} }}$$$
If the free stream velocity is $$2$$ $$m/s$$, and air has Kinematic viscosity of $$1.5 \times {10^{ - 5}}{m^2}/s$$ and density of $$1.23$$ $$kg/{m^3}$$, then wall shear stress at $$x=1$$ $$m$$, is

The pressure gauges $${G_1}$$ and $${G_2}$$ installed on the system show pressures of $${P_{G1}} = 5.00$$ bar and $${P_{G2}} = 1.00$$ bar. The value of unknown pressure $$P$$ is

The pressure gauges $${G_1}$$ and $${G_2}$$ installed on the system shown pressures of $${P_{G1}} = 5.00$$ bar and $${P_{G2}} = 1.00$$ bar. The value of unknown pressure $$P$$ is