A phase-controlled, single-phase, full-bridge converter is fed from a $$230$$ $$V,$$ $$50$$ $$Hz,$$ $$AC$$ source. The fundamental frequency in $$Hz$$ of the voltage ripple on the $$DC$$ side is

The figure below shows the circuit diagram of a controlled rectifier supplied from a $$230V,$$ $$50$$ $$Hz,$$ $$1$$-phase voltage source and a $$10:1$$ ideal transformer. Assume that all devices are ideal. The firing angles of the thyristors $${T_1}$$ and $${T_2}$$ are $${90^ \circ }$$ and $${270^ \circ },$$ respectively.

The $$RMS$$ value of the current through diode $${D_3}$$ in amperes is ________________.

In the circuit shown all elements are ideal and the switch $$S$$ is operated at $$10$$ $$kHz$$ and $$60$$% duty ratio. The capacitor is large enough so that the ripple across it is negligible and at steady state acquires a voltage as shown. The peak current in amperes drawn from the $$50$$ $$V$$ $$DC$$ source is ________. (Give the answer up to one decimal place.)

A three-phase voltage source inverter with ideal devices operating in $${180^ \circ }$$ conduction mode is feeding a balanced star-connected resistive load. The $$DC$$ voltage input is $${V_{dc}}.$$ The peak of the fundamental component of the phase voltage is