GATE ME 2005 | GATE ME Year Wise Previous Years Questions

GATE ME 2005

MCQ (Single Correct Answer)

-0.6

Which among the $$NC$$ operations given below are continuous path operations? Arc Welding $$(A$$ $$W)$$, Milling $$(M),$$ Drilling $$(D),$$ Punching in Sheet Metal $$(P)$$ Laser Cutting of Sheet Metal $$(LC),$$ Spot Welding $$(SW).$$

$$AW,LC$$ and $$M$$

$$AW,D,LC$$ and $$M$$

$$D,LC, P$$ and $$SW$$

$$D, LC,$$ and $$SW$$

GATE ME 2005

MCQ (Single Correct Answer)

-0.6

The tool of an $$NC$$ machine has to move along a circular arc from $$(5,5)$$ to $$(10,10)$$ while performing an operation. The center of the arc is at $$(10,5).$$ Which one of the following $$NC$$ tool path commands performs the above mentioned operation?

$$N010\,\,\,\,G02\,\,\,\,X10\,\,\,\,Y10\,\,\,\,X5\,\,\,\,Y5\,\,\,\,R5$$

$$N010\,\,\,\,G03\,\,\,\,X10\,\,\,\,Y10\,\,\,\,X5\,\,\,\,Y5\,\,\,\,R5$$

$$N010\,\,\,\,G01\,\,\,\,X5\,\,\,\,Y5\,\,\,\,X10\,\,\,\,Y10\,\,\,\,R5$$

$$N010\,\,\,\,G02\,\,\,\,X5\,\,\,\,Y5\,\,\,\,X10\,\,\,\,Y10\,\,\,\,R5$$

GATE ME 2005

MCQ (Single Correct Answer)

-0.3

In order to have interference fit, it is essential that the lower limit of the shaft should be

Greater than the upper limit of the hole

Lesser than the upper limit of the hole

Greater than the lower limit of the hole

Lesser than the lower limit of the hole

GATE ME 2005

MCQ (Single Correct Answer)

-0.6

A $$2$$ $$mm$$ thick metal sheet is to be bent at an angle of one radian with a bend radius of $$100$$ $$mm.$$ If the stretch factor is $$0.5,$$ the bend allowance is GATE ME 2005 Production Engineering - Sheet Metal Forming Processes Question 15 English

GATE ME 2005 Production Engineering - Sheet Metal Forming Processes Question 15 English

$$99$$ $$mm$$

$$100$$ $$mm$$

$$101$$ $$mm$$

$$102$$ $$mm$$

PREVIOUS NEXT

GATE ME Papers

2024