The flowing stress (in $$MPa$$) of a material is given by $$\sigma = 500{\varepsilon ^{0.1}},$$
When $$\varepsilon $$ is true strain. The Young's modulus of elasticity of the material is $$200$$ $$GPa.$$ A block of thickness $$100$$ $$mm$$ made of this material is compressed to $$95$$ $$mm$$ thickness and then the load is removed. The final dimension of the block (in $$mm$$) is ____________

During a $$TIG$$ welding process, the arc current and arc voltage were $$50$$ $$A$$ and $$60$$ $$V,$$ respectively, when the welding speed was $$150$$ $$mm/min.$$ In another process, the $$TIG$$ welding is carried out at a welding speed of $$120mm/min$$ at the same arc welding voltage and heat input to the material so that weld quality remains the same. The welding current (in $$A$$) for this process is

A single point cutting tool with $${0^0}$$ rake angle is used in an orthogonal machining process. At a cutting speed of $$180$$ $$m/min$$ the thrust force is $$490N.$$ If the coefficient of friction between the tool and the chip is $$0.7.$$ Then the power consumption (in $$kW$$) for the machining operation is ____________

Which one of the following statements is TRUE?