A tube of $$32mm$$ outside diameter was turned on a lathe and the following data was obtained
Rake angle $$=35deg,$$
Feed rate $$=0.1mm/rev$$
Cutting force $$=2000N,$$
Cutting speed $$=15m/min$$
Length of continuous chip is one revolution $$=60mm$$

Feed force $$=800N.$$ Calculate the chip thickness, shear plane angle, velocity of chip along tool face and coefficient of friction.

A lead screw with half nuts in a lathe, free to rotate in both directions has

Trepanning is performed for

The hardness of a grinding wheel is determined by the