1
GATE EE 1995
MCQ (Single Correct Answer)
+1
-0.3
Four ammeters $$M1, M2, M3$$ and $$M4$$ with the following specifications are available. GATE EE 1995 Electrical and Electronics Measurement - Basic of Indicating Instruments Question 38 English

A current of $$1$$ $$A$$ is to be measured. To obtain minimum error in the reading, one should select meter

A
$$M1$$
B
$$M2$$
C
$$M3$$
D
$$M4$$
2
GATE EE 1995
Subjective
+5
-0
The distribution factor for a $$36$$ slot stator with three-phase, $$8$$-pole winding, having $${120^ \circ }$$ phase Spread, is _________
3
GATE EE 1995
MCQ (Single Correct Answer)
+1
-0.3
A differentially compounded d.c. motor with interpoles and with brushes on the neutral axis is to be driven as a generator in the same direction with the same polarity of the terminal voltage. It will then
A
be a cumulatively compound generator but the interpole coil connections are to be reversed
B
be a cumulatively compounded generator without reversing the interpole coil connections.
C
be a differentially compounded generator without reversing the interpole coil connections
D
be a differentially compounded generator but the interpole coil connections are to be reversed.
4
GATE EE 1995
Numerical
+1
-0
The percentage impedance of a 100 kVA, 11 kV/400V, delta/wye, 50 Hz transformer is 4.5%. For the circulation of half the full load current during short circuit test, with low voltage terminals shorted, the applied voltage on the high voltage side will be __________.
Your input ____
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12