Allowance in limits and fits refers to

For turning $$NiCr$$ alloy steel at cutting speeds of $$64m/min$$ and $$100m/min,$$ the respective tool lives are $$15min$$ and $$12$$ $$min.$$ The tool life for a cutting speed of $$144m/min$$ is

During orthogonal cutting of mild steel with a $$10$$ degrees rake angle tool the chip thickness ratio was obtained as $$0.4.$$ The shear angle (in degrees) evaluated from this data is

resistance spot welding is performed on two plates of $$1.5$$ $$mm$$ thickness with $$6$$ $$mm$$ diameter electrode, using $$15000$$ $$A$$ current for a time duration of $$0.25sec$$. assuming the interface resistance to be $$0.0001\Omega ,$$ the heat generated to form the weld is